|
 The
Layer Tools menu consists of a
number of tools that provide various shortcuts for working with layers.
Toolbar
: Layer Tools 
Menu
: GeoTools 
Layer Tools
Layer isolieren
Command
line: GT_ISOD
The GT_ISOD command is used to isolate (segregate) the selected data from a very large complex drawing. It
thaws and switches on the layers of selected objects and freezes all
other layers in the drawing.
The GT_ISOD command provides two ways of selecting the layers to isolate
i) You can directly select the objects to isolate.
ii) You can press Enter to select the layers to isolate from the
select layer dialog box. Note:
GT_ISOD command stores the current layer settings as GEOTOOLS_ISO. Which
can be restored by using command GT_RESTORE.
Toolbar
: Layer Tools 
Menu
: GeoTools
Layer
Tools
Isolierte Layer wiederherstellen
Command
line: GT_RESTORE
The GT_RESTORE command is used to restore the
layer settings freezed by GT_ISOD command.
Note: GT_RESTORE command restores the last
layer state set by GT_ISOD command.
Layer tools allow to save three states of layers by using commands
GT_SL1, GT_SL2, GT_SL3 which can be restored by using GT_RL1, GT_RL2,
GT_RL3 respectively.
Toolbar
: Layer Tools 
Menu
: GeoTools
Layer
Tools
Layerstatus sichern - 1
Command
line: GT_SL1
The GT_SL1 command is used to save the layer
state - 1
Toolbar
: Layer Tools 
Menu
: GeoTools
Layer
Tools
Layerstatus sichern - 2
Command
line: GT_SL2
The GT_SL2 command is used to save the layer
state - 2
Toolbar
: Layer Tools 
Menu
: GeoTools
Layer Tools
Layerstatus sichern - 3
Command
line: GT_SL3
The GT_SL3 command is used to save the layer
state - 3
Toolbar
: Layer Tools 
Menu
: GeoTools
Layer Tools
Layerstatus wiederherstellen - 1
Command
line: GT_RL1
The GT_RL1 command is used to
restore the layer state saved by GT_SL1.
Toolbar
: Layer Tools 
Menu
: GeoTools
Layer Tools
Layerstatus wiederherstellen - 2
Command
line: GT_RL2
The GT_RL2 command is used to
restore the layer state saved by GT_SL2.
Toolbar
: Layer Tools 
Menu
: GeoTools
Layer Tools
Layerstatus wiederherstellen - 3
Command
line: GT_RL3
The GT_RL3 command is used to
restore the layer state saved by GT_SL3.
Toolbar
: Layer Tools 
Menu
: GeoTools
Layer Tools
Wechsel auf den aktuellen layer
Command
line: GT_CCL
Allows to quickly select objects and bring them to the current layer.
The standard object selection dialog box is displayed.
GT_CCL Tutorial
Toolbar
: Layer Tools 
Menu
: GeoTools
Layer
Tools
Kopieren auf den aktuellen Layer
Command
line: GT_CPCL
Allows to quickly copy selected objects and bring them to the current layer.
The standard object selection dialog box is displayed.
Toolbar
: Layer Tools
Menu
: GeoTools
Layer Tools
Layerinhalt in einen anderen Layer kopieren
Command
line: GT_COPYLYR
The GT_COPYLYR command is used to
copy objects from one layer to another. The command prompts the user to
enter source layer name and destination layer name and the objects will be
copied from source to destination layer.
|