CADPower -> Layer

Prev: Inquiry

Table of Contents

Next: Mechanical


 

The Layer  menu consists of a number of tools that provide various shortcuts for working with layers.


Toolbar : Layer 
      Menu : CADPower Layer  Layer Names Editor
Command line : CP_LAYERMAN

The CP_LayerMan command is used for managing the layer names, you can add Suffix / Prefix to layer names, change the case of the layer name, Merge layers etc.



 



Toolbar : Layer   
      Menu : CADPower Layer  Isolate layer(s)
Command line : CP_ISOD
The CP_ISOD command is used to isolate (segregate) layer-wise data from large complex drawings. It thaws and switches on the layers of selected objects and freezes all other layers in the drawing.

The CP_ISOD command provides two ways to select layers to isolate by picking an object on the layer or by selecting from a list.

Note: CP_ISOD command stores the current layer settings as CADPower_ISO and can be restored using the CP_RESTORE command.

 

 


Toolbar : Layer    
      Menu : CADPower Layer  Restore Isolated layer(s)
Command line : CP_RESTORE
The CP_RESTORE command is used to restore the layer settings stored by the CP_ISOD command.

 



The next 3 commands CP_SL1, CP_SL2, CP_SL3 allow three pre-defined layer states to be set.

Toolbar : Layer    
      Menu : CADPower Layer  Save layer state - 1
Command line : CP_SL1



Toolbar : Layer    
      Menu : CADPower Layer  Save layer state - 2
Command line : CP_SL2



Toolbar : Layer    
      Menu : CADPower Layer  Save layer state - 3
Command line : CP_SL3



 

The next 3 commands CP_RL1, CP_RL2, CP_RL3 allow the three pre-defined layer states to be restored.  

Toolbar : Layer    
      Menu : CADPower Layer  Restore layer state - 1
Command line : CP_RL1



Toolbar : Layer    
      Menu : CADPower Layer  Restore layer state - 2
Command line : CP_RL2


Toolbar : Layer    
      Menu : CADPower Layer  Restore layer state - 3
Command line : CP_RL3



 


Toolbar : Layer    
      Menu : CADPower Layer  Change to current layer
Command line : CP_CCL
The CP_CCL command changes selected objects to current layer.


CP_CCL Tutorial

 

 

 

Toolbar : Layer    
      Menu : CADPower Layer  Copy to current layer
Command line : CP_CPCL
The CP_CPCL copies selected objects into current layer.





Toolbar : Layer    
      Menu : CADPower Layer  Copy layer contents to another layer
Command line : CP_COPYLYR
The CP_COPYLYR command is used to copy all objects from one layer to another.

 

 

Prev: Inquiry

Table of Contents

Next: Mechanical